Microflow
The Microflow is used for blowing in small fibre optic cable 1- 4 mm. With the Microflow cable blowing is fully automated - Push a button and the Microflow is taking care of the job. The continuously variable operation speed and the maximum speed are preselectable. A micro sensor supervises the linear course of the fibre optic. A lateral swivel out due to the rising friction or obstacles will cause an immediate stop and the cable is move
| Technical Data: | |
| max. speed: | 100 m/min |
| required air flow: | 1 m³/min |
| required air pressure: | 15 bar |
| required electric power supply:: | 230 V |
| rating: | 180 W |
| Order No. | 111.350.00 |
Spare and wear parts
Adaption set
This is a complete set of format parts consisting of nylon fibre guide, wheels, top blowing junction block, bottom blowing junction block, fibre cable sensor arm and o-rings for the wheels. The Adaption set is available in different sizes and must be used according to the actual size of fibre cable and micro duct. Please specify the size of the fibre cable and micro duct.
| Order No. | Adaption set | Kabelgröße |
|---|---|---|
| 111.352.00 | A | 1.0 – 1.7 mm |
| 111.353.00 | B | 1.8 – 2.6 mm |
| 111.354.00 | C | 2.7 – 3.6 mm |
| 111.355.00 | D | 3.7 – 4.2 mm |
Applicator
The applicator leads the cable into the Microflow. It is available in different sizes according to the actual size of the fiber cable.
| Bestell Nr. | Applicator | Kabelgröße |
|---|---|---|
| 111.362.00 | A | 1.0 – 1.7 mm |
| 111.363.00 | B | 1.8 – 2.6 mm |
| 111.364.00 | C | 2.7 – 3.6 mm |
| 111.365.00 | D | 3.7 – 4.2 mm |
Wheel
Two wheels pull the cable into the Microflow. The wheel is available in different sizes according to the size of the cable.
| Order No. | Wheel | Kabelgröße |
|---|---|---|
| 111.366.00 | A | 1.0 – 1.7 mm |
| 111.367.00 | B | 1.8 – 2.6 mm |
| 111.368.00 | C | 2.7 – 3.6 mm |
| 111.369.00 | D | 3.7 – 4.2 mm |
Top blowing junction block
The blowing junction block consists of two parts (top/bottom). Both parts must be adapted to the actual size of the fibre optic cable and the duct. Please specify the sizes and we will advise the correct size of the blowing junction unit.
| Order No. Top Adapter | Order No. Bottom Adapter | Type | Dia. of cable |
|---|---|---|---|
| 111.370.00 | 111.376.00 | A | 1.0 – 1.7 mm |
| 111.371.00 | 111.377.00 | B | 1.8 – 2.6 mm |
| 111.372.00 | 111.378.00 | C | 2.7 – 3.6 mm |
| 111.374.00 | 111.379.00 | D | 3.7 – 4.2 mm |
-
Top adapter -
lower adapter
Fibre cable sensor arm
The fibre cable sensor arm is the unique protection technology of our Microflow. It stops the cable blowing machine as soon as the cable gets bent inside the blowing junction block and the cable cannot get damaged. The sensor arm is available in different sizes according to the actual size of the fibre cable.
| Order No. | Sensor Type | Dia. of cable |
|---|---|---|
| 111.366.00 | A | 1.0 – 1.7 mm |
| 111.367.00 | B | 1.8 – 2.6 mm |
| 111.368.00 | C | 2.7 – 3.6 mm |
| 111.369.00 | D | 3.7 – 4.2 mm |
O-ring for Wheel
It is available indifferent sizes according to he size of the wheel/cable.
| Order no. | O-Ring | Dia. of cable |
|---|---|---|
| 111.385.00 | A | 1.0 – 1.7 mm |
| 111.386.00 | B | 1.8 – 2.6 mm |
| 111.387.00 | C | 2.7 – 3.6 mm |
| 111.388.00 | D | 3.7 – 4.2 mm |
Lubricant Bagela lube B 50 Order No. 111.340.00
This lubricant is characterized by excellent slipping quality. It is urgently recommended for the application with Miniflow and Microflow.
