Laying of fibre optic cable, calibration

Receiver

Cable avoidance and transmitter locating system

Current laying techniques also include direct blow-in methods, for which the cable ducts have to be gauged beforehand to check them for any internal deformations. This will ensure unhampered blow-in. The gauge, which contains a sonde, is blown through the cable duct by compressed air. If the gauge with the sonde gets stuck in transit, its position can exactly be pinpointed down to a depth of 4.50 m by passing a receiver along the course of the cable duct. As soon as the receiver approaches the sonde, a continuous optical and acoustic signal will be emitted, which will reach its maximum level right on top of the underground location where the sonde has to stuck.
The additionally applications are the localization of underground laid cables, metal lines and house service lines. Lines can be irradiated with the transmitter that the signal will be strong enough for the receiver.

Type	Order No.	Weight kg	Batteries	Service life
Receiver	009.675.30	2.2	8x LR6 (1,5 V)	> 40 h
Sending gripper	009.675.34
Transmitter	009.675.32
Bag	009.675.31
Sonde	009.674.10	0.08	1x CR 1/3N	5 h

Sonde diameter 18 mm Order No. 009.674.10

Calibation arbor for

Inner duct dia.	Weight	Bestell-Nr.
28 mm	0.2 kg	009.667.00
35 mm	0.25 kg	009.677.10
40 mm	0.3 kg	009.677.20

Optical fibre plunger, flexible

Inner duct dia.	Weight	Order No.
40 mm	0.3 kg	009.957.00
50 mm	0.35 kg	009.958.10

Optical fibre plunger, flexible for pipes with an implemented cable

Inner duct dia.	Weight	Order No.
35 -55 mm	0.45 kg	009.962.40

Optical fibre cable pulling grip made of galvanized steel wire, one thimble, double,reduced to single

dia. cable	Order No.
2.5 - 5.6 mm	009.646.00
5.3 - 9.2 mm	009.646.01
8.1 - 12.5 mm	009.646.02
10.7 - 15.8 mm	009.646.03
13.5 - 19.1 mm	009.646.04
16.3 - 22.4 mm	009.646.05
19.1 - 25.5 mm	009.646.06

Cable slip oil Gliss F 25l can
Order No. 117.053.00

Arrester barrier for sleeved pistons and measuring gauge with sonde
Weight: 2.5 kg Order No. 111.041.00

Plug for micro ducts

The plug is equipped with a o-ring for 100% sealing. It is easy to mount with self cutting thread. It is available in other sizes. Please specify when ordering.

Order No.	Product name
111.296.00	Plug for 7 mm micro duct
111.297.00	Plug for 10 mm micro duct
111.298.00	Plug for 12 mm micro duct

End sizing installation with compressed air measurement and compressed air connect

Weight: 3.1 kg Order No. 111.042.00

Pressure gauge with loggin,
for leak test, could be connected to the end sizing installation
Bestell-Nr. 111.045.00

Micro Pipe Cutter
Order No. 111.261.50

Pipe Cutter for Pipe Dia. 50 mm
For lengthwise and crosswise cuts
Order No. 111.444.00

Y-Fitting
To blow in a second cable or micro pipe, the Y-Fitting joins the old pipe with an intermediate pipe which is connected with the Powerflow. The protective pipe gets locked on both sides.

Order No. 111.242.00
(without pipe and cable)

Automatic lubrication unit for Powerflow and Multiflow
This pump enables a precise dosing for constant lubrication and increases the to be laid length a lot.
(Without can of cable slip oil)
Order No. 111.244.00

Uncoiling cage for fibre optic cable
If it is not possible to insert the whole length in one step, the cable drum has to be positioned in the middle of the trail. The first length gets inserted in one direction and the remaining cable laid into the cage.
The uncoiling cages all owes a controlled and efficient uncoiling of the cable off the drum.
Order No. 111.245.00

This cage can be packed particularly space-saving and fits in nearly every conventional boot.

Sealing unit with manometer Order No. 111.261.00

Laterally of the drum is the inner end of the duct where this unit is to be inserted and remain fixed during the injection procedure. A pressure loss will become visible at the manometer immediately.

Overpressure testing unit Order No. 111.260.00

facilitates this procedure and shortens the temporal expenditure to a minimum. A pressure loss will become visible at the manometer immediately. (The connecting hoses to 111.261.00 are included)

Guidance unit for micro ducts Order No. 111.262.00

The guidance unit is to be positioned between the micro duct drums and the Multiflow. It ensures a regular uncoiling of the ducts.

Additional acceptance for micro duct drums Order No. 028.328.00

This acceptance fits in all trailers of the series BKT 18 up to BKT 27

Micro Pipe Pulling Unit

Each strand has a tensile load of max. 300 kg.

Attention: Please follow the tensile load limit restrictions of the appropriate micro pipe.
The single strands are to be assembled, please make your choice.

Order No.	Outer dia. mm	Thickness mm	Strand length mm
111.295.11	1 x 7	1	40
111.295.12	1 x 7	1	50
111.295.13	1 x 7	1	60
111.295.14	1 x 7	1	70

111.295.21	1 x 10	1	40
111.295.22	1 x 10	1	50
111.295.23	1 x 10	1	60
111.295.24	1 x 10	1	70

111.295.31	1 x 12	1	40
111.295.32	1 x 12	1	50
111.295.33	1 x 12	1	60
111.295.34	1 x 12	1	70

111.295.41	1 x 14	2	40
111.295.42	1 x 14	2	50
111.295.43	1 x 14	2	60
111.295.44	1 x 14	2	70

111.295.51	1 x 16	2	40
111.295.52	1 x 16	2	50
111.295.53	1 x 16	2	60
111.295.54	1 x 16	2	70

111.295.61	1 x 20	2	40
111.295.62	1 x 20	2	50
111.295.63	1 x 20	2	60
111.295.64	1 x 20	2	70

107.070.00	Shackle for pulling unit (to be ordered with the strands)

Calibration of micro pipes – simple localization of pipe damages

Receiver for Minisonde,
10 kHz, The scope of delivery includes 6 batteries and a bag.
Order No. 009.675.50

Bag for Receiver (ohne Abbildung) Bestell No. 009.675.51

Battery for Receiver (without illustration) Order No. 009.675.52

Minisonde for calibration of micro pipes, Diameter: 6,4mm, Length: 85 mm

Frequency: 10 kHz Order No. 009.675.60

Frequency: 33 kHz Order No. 009.675.61

Battery for Minisonde Order No. 009.675.62